Two-piece Orange option shown. Single pieces are also available.
COMFORT FOR THE ROAD AHEAD
A more considered start to every drive.
The familiar route to work. A few errands across town. A longer trip with somewhere good at the end. Your seat is part of all of them.
These separate neck and lumbar cushions bring two contoured shapes to that everyday setting. Choose the piece you need, or select the two-piece option for both positions—then take a moment to make the setup your own.
Two positions. One clear choice.
The neck pillow and lumbar pillow are separate products within this listing. The Type you select—not the number of cushions in a lifestyle photograph—determines what arrives.
Illustrated use of the two-piece option; this is not a vehicle-fit or safety certification.
IN YOUR EVERYDAY
Your routine, with a little more attention to the seat.
A considered driving setup starts with the relationship between you, the seat and the controls. The smaller contoured pillow sits at the neck area; the broader lumbar cushion sits lower against the seat back.
Use the separate pieces to explore the position that works with your own seat. Settle in and check everything while parked, before the journey begins.
At the neck
A smaller shaped cushion for the upper seat area. Its position should work with—not replace or compromise—the vehicle’s original head restraint.
At the lower back
A wider cushion for the lower back area. Check the depth it adds and your ability to reach the steering wheel and pedals comfortably.
Separate by design
You do not have to buy both. Neck Pillow · 1pc, Lumbar Pillow · 1pc and Neck & Lumbar · 2pcs remain distinct choices.
PRODUCT DETAILS
The details of this product, in full.
Understand the two shapes, the available configurations and the practical information behind your choice.
Two distinct shapes for your everyday drive.
The neck pillow and lumbar pillow are separate cushions, each shaped for a different area of the seat. The neck pillow has a curved face and a scooped lower edge. The wider lumbar cushion has curved edges and three visible channels across its front.
Choose a single piece if that is all you need, or select the matching two-piece configuration. The pieces are not joined together and do not form a seat pad or full-seat cover.
Neck Pillow · 1pc: one neck pillow.
Lumbar Pillow · 1pc: one lumbar pillow.
Neck & Lumbar · 2pcs: one neck pillow and one lumbar pillow.
A considered fit starts with the details.
The product size image lists the neck pillow at approximately 28 × 24 × 13 cm (width × height × depth) and the lumbar pillow at approximately 40 × 30 × 5 cm. Use these measurements to compare the intended position on your own seat.
Five colors are available: Black, Gray, Orange, Blue and Pink. Color is a separate choice from Type; selecting a color does not change a single piece into a complete set.
Place and check the selected cushions while parked. Follow your vehicle handbook and the instructions supplied with the product. Keep seat belts, airbags, head restraints, controls and mirrors unobstructed, and do not adjust the cushions while moving.
For care, follow the information supplied with your item. For product or order questions, contact support@easevora.com.
VISIBLE DETAILS
A closer look at the shapes.
The original product views show the details that distinguish the two cushions. Look at the whole silhouette as well as the contact surface.
01 / NECK
A contoured neck profile
The neck pillow has a broad curved face and a scooped lower edge. The contrasting side panel makes its depth easy to see; use the dimensions below to compare that profile with your own seat.
02 / LUMBAR
A wider lumbar shape
The lumbar cushion has a wider outline with curved edges and three visible vertical channels across the front. It is a separate back cushion—not a seat pad or a full-seat cover.
03 / TWO-PIECE OPTION
Two independent pieces
In the two-piece configuration, the neck and lumbar cushions remain separate. Their matching color creates a coordinated look without joining the upper and lower sections together.
CHOOSE YOUR CONFIGURATION
One piece, or the matching pair.
Choose Type first, then Color. This is the simplest way to make sure the price, selected image and contents match what you mean to order.
Neck Pillow · 1pc
One neck pillow only. Choose this configuration when you want the smaller upper-seat cushion without a lumbar cushion.
Lumbar Pillow · 1pc
One lumbar pillow only. Choose this configuration for the wider lower-back cushion without a neck pillow.
Neck & Lumbar · 2pcs
One neck pillow plus one lumbar pillow, in the selected color. Choose this option when you want both separate support positions.
The two-piece option contains one neck pillow and one lumbar pillow for one seating position. A photograph showing two equipped car seats does not mean two sets are included.
Make the first setup with the vehicle parked. Treat it as part of arranging the whole seat, rather than dropping a cushion in and driving away.
01
Begin with your normal seat position
Set the vehicle seat and original head restraint according to the vehicle handbook. Check that you can reach the steering wheel and pedals and see the mirrors before adding the selected cushion.
Keep the vehicle’s own seat and restraint guidance as the starting point.
02
Place only the pieces you selected
Position the neck pillow at the intended upper support area and the lumbar cushion at the lower back, as applicable. Follow the attachment instructions supplied with your item and make sure each selected piece stays in place.
Do not improvise a strap route across an airbag area or other safety component.
03
Check the complete setup
Sit back and check the belt path, head restraint, seat controls, mirrors and your range of movement. If a piece shifts, changes safe control reach or compromises the restraint position, do not drive with it installed.
Stop safely before any later adjustment. Never reposition the cushions while moving.
FIT & COMPATIBILITY
Measure the space. Check the seat.
Vehicle seats differ in shape, contour and safety equipment. The listed dimensions help you compare the product with your seat, but dimensions alone cannot confirm vehicle compatibility.
APPROXIMATE DIMENSIONS
Neck pillow
28 × 24 × 13 cm (W × H × D), approximately 11.0 × 9.4 × 5.1 in. Compare the width and depth with the intended upper-seat position, while keeping the original head restraint correctly positioned.
The 13 cm depth is particularly relevant when checking how the cushion changes the space behind you.
APPROXIMATE DIMENSIONS
Lumbar pillow
40 × 30 × 5 cm (W × H × D), approximately 15.7 × 11.8 × 2.0 in. Compare its width with the clear space between the seat bolsters, and its depth with your normal seated reach.
Check the full seat-back shape rather than relying only on the seat’s overall width.
BEFORE DRIVING
Keep the essentials clear
Seat belts must remain correctly routed and unobstructed.
Airbag deployment areas and seat controls must remain clear.
The original head restraint must retain its intended position and function.
You must retain safe visibility, movement and access to vehicle controls.
Approximate dimensions reproduced from the product’s size image. Inch values are rounded conversions. Check the vehicle handbook and supplied product instructions; there is no verified universal-vehicle fit claim.
AT A GLANCE
The important details, together.
Keep the configuration and practical information close to hand before choosing your option.
The questions that matter most for this product: what is included, how the pieces differ and what to check before using them.
Does every option include both cushions?
No. Neck Pillow · 1pc contains one neck pillow. Lumbar Pillow · 1pc contains one lumbar pillow. Only Neck & Lumbar · 2pcs contains one of each. Check the Type and Color shown in the purchase area before adding to cart.
Is the two-piece option enough for two car seats?
The two-piece option is one neck pillow and one lumbar pillow, not two complete sets. Images of two equipped seats are demonstrations of placement rather than the contents of a single order.
Will it fit every vehicle or seat?
We cannot confirm universal fit. Compare the listed dimensions with your seat and follow the vehicle handbook’s guidance on accessories, airbags and head restraints. Do not use a setup that interferes with the vehicle’s safety equipment or your ability to drive safely.
Does the neck pillow replace the car’s head restraint?
No. It is an accessory cushion, not a replacement head restraint or crash-protection device. Keep the original head restraint installed and correctly positioned according to the vehicle handbook.
Can I change its position during a journey?
Only after stopping safely and parking. Never adjust either cushion while the vehicle is moving. If a piece moves or the setup feels insecure, stop using that setup until it has been checked.
Can I remove or machine-wash the cover?
A removable, machine-washable cover has not been confirmed for this listing. Follow the care label or supplied instructions instead of assuming that the cover or inner cushion can be washed.
What if I am unsure which configuration to choose?
Start with the area you want to add a cushion to, then compare the relevant dimensions and seat restrictions. If anything remains unclear, contact support@easevora.com with the Type you are considering and details of your seat before ordering.
HERE TO HELP
Ready when the details feel right.
Choose your configuration, confirm your color and keep the practical terms in view.
Shipping & delivery
Free standard shipping is available on eligible orders of $49 USD or more. Available delivery methods, charges and estimates are shown at checkout.
For configuration, product or order questions, contact support@easevora.com. Include the relevant product and seat details so we can help with your specific question.
